***One part number
includes both driver and passenger suspension bushings as noted at
the end of each part number (x2, x4, etc.). Confirm anti-roll bar
diameter before ordering.***
Powerflex polyurethane bushings are
designed to decrease the amount of deflection in your car's
suspension for better handling, driver feedback, and tire wear.
Powerflex uses premium polyurethane materials for minimal NVH
(noise, vibration, harshness) and increased longevity over the
stock rubber bushings. The quality of Powerflex products can be
seen the moment you open the box: premium polyurethane, detailed
moldings, lube holding grooves and knurls, and 304 stainless
sleeves. Each kit is supplied with a copper-based grease for
extended squeak-free operation. In many applications (if noted in
diagram), we have polyurethane engine/drivetrain mounts and
reinforcements to reduce movement for better throttle response and
more power to the wheels.
Powerflex bushings do
not come in complete chassis kits. Our bushings come à la carte to
fit each customer's needs. An automobile's bushings and mounts wear
at different rates making "complete-kit" bushing sets unnecessary
for many car owners. Replacing only the "weak links" in your car's
suspension is a great way to tighten handling without stressing the
budget. Bushings come in pre-determined durometers (measured
hardness) engineered to reduce bushing deflection while keeping NVH
to an absolute minimum. Some locations have an optional stiffer
durometer material for an even higher level of performance and
feedback. Please contact us for custom durometer
applications.
Powerflex copper-based
grease is supplied with every dynamic product. We suggest using
only a copper-based grease for lubrication. Due to grooves and
knurls cast into the material to hold the lubricant, bushings will
rarely need re-lubing. We do not suggest using an "anti-seize"
product for lubrication.
All Powerflex bushings
are made in the UK and come with a 1 year, unlimited mile
warranty.
Front Anti Roll Bar Bushes, Check
the original bush design and select the correct design and bar
diameter from the following before ordering.
PFF57-305-* = Round bush, 35mm outside body diameter and 41mm
overall length.
PFF57-306-** = Round bush, 40mm outside body diameter and 55mm
overall length.
PFF57-209-*** = D shaped bush.
PFF57-307 Front Anti Roll Bar Outer Bush fits 924S &
944 models with a alloy bracket which houses the bush &
bolts onto the wishbone. For all other models use PFF57-205- and
PFF57-308.
*Check roll bar sizes before ordering.
